Home > Services > Performance Stats > Volkswagen > Passat (B5) 1996-2005 > Diesel > 1.9 TDI PD 115 bhp
Volkswagen

Volkswagen Passat (B5) 1996-2005 1.9 TDI PD 115 bhp | ECU Remap | Chiptuning

Volkswagen Passat (B5) 1996-2005 1.9 TDI PD 115 bhp Stage 1 tuning
MODEL:
Passat
VARIANT:
1.9 TDI PD 115 bhp
YEARS:
1996 - 2001
ENGINE SIZE:
1896 CCM
FUEL:
Diesel
ECU TYPE:
Bosch EDC15P+
The 1.9 TDi 115bhp utilises a VNT Garrett Turbo charger and side mounted intercooler which provide good performance from the PD engine. We utilise torque limiters in our modified software to ensure the engine speeds reach 2,250rpm before bringing in maximum torque, this ensures a higher lbft torque figure to be achieved whilst maintaining clutch life. Like all the PD engines, turbo upgrades provide for massive power gains should you wish to go further? We develop all of our software on the rolling road to ensure accuracy in terms of both power delivery and also to ensure fuelling, boost pressures and exhaust gas temperatures are all within tolerance. Our aim is for maximum power whilst maintaining optimum reliability.
STAGES

Performance STAGES

ECO Stage 1

Power (bhp)

Original
115

bhp

Modified
160

bhp

Difference

Torque (lb/ft)

Original
210

lb/ft

Modified
255

lb/ft

Difference

STAGE NOTES

Our Stage 1 ECU remap is developed to safely improve your vehicle's power and torque whilst maintaining standard components and remaining within tolerances. <br/><br/> It's the perfect balance of increased power and day-to-day usability, which is ideal for those who want extra performance but not at the cost of additional hardware or reliability.

OPTIONS

ADDITIONAL OPTIONS

Where applicable we are able to switch off the software functionality and monitoring for the Exhaust Gas Recirculation valve enabling it to be blanked off. For more information please refer to our section on EGR Removal.Where applicable we are able to raise the RPM limiter enabling a wider RPM band for performance. This is available on both petrol and diesel engines.Where applicable we are able to alter/install launch control into the software. This enables fixed RPM launches enabling faster sprint times. An addition for the dedicated enthusiast.Immobiliser Delete
REVIEWS

CUSTOMER REVIEWS

MODEL:
Volkswagen Passat
VARIANT:
1.9 TDI PD
POSTED: 18 May / 2015 / 13:24
ANONYMOUS, UNITED KINGDOM

Just thought I'd let you know now I'm back on roads I know and have had a chance to try the car out properly I am very pleased the car pulls hard from 1400 rpm all the way to 4000+ rpm in any gear, I found I have had to change the way I use the throttle (slightly more than I used to) to make use of any of the power increase and after a day or two it was quite natural.

My test route hill which caused the problems I tried late the other evening and reached an indicated 110mph before I had to lift for the bend definite improvement! towing is massively improved less down changes and when you do have to change down no trace of a flat spot just an engine willing to pull.

I appreciate the extra work you had to put in on my car and I'm well pleased with the result, I will happily recommend you to anyone.

AUTOMATIC

HAVE AN AUTOMATIC?

Alongside the engine control unit (ECU) we are also able to provide transmission control unit (TCU) software to help further enhance your vehicle. There is a lot of limitation built into modern gearbox software to help hold back the power gains you are trying to achieve from your engine, our gearbox software overcomes this and helps transform the way the car drives. Some of the modifications include raising maximum torque limiters, faster gear shift speeds, increased clamping pressures to prevent clutch wear, increased engine RPM limiters and much more…

CUSTOM

ARE YOU AFTER CUSTOM TUNING?

For most makes and models we can develop custom software to suit your individual setup. Get in touch with us and let us know your build to see what we can do for you.

DEALER

FIND A DEALER

FIND A DEALER

Enter your location to find your nearest dealer