Audi

Audi S3 (8L) 1996-2003 1.8 20VT 225 bhp | ECU Remap | Chiptuning

Audi S3 (8L) 1996-2003 1.8 20VT 225 bhp                            Stage 1 tuning
MODEL:
S3
VARIANT:
1.8 20VT 225 bhp
YEARS:
1996 - 2003
ENGINE SIZE:
1781 CCM
FUEL:
Petrol
ECU TYPE:
Bosch ME7.5
The 1.8 20v Turbo engine is a superb base for tuning, with a huge list of stock components as well as aftermarket, the potential for tuning this engine is huge. Running a large flow capacity KO4 turbo, it?s good for higher pressures and more power than the KO3 range in the lower power variants. The performance gains from software alone are impressive! Check out our Stage 2 & 3 conversions if modified software alone isn't enough as this engine has the capability of 400bhp with the right setup! We develop all of our software on the rolling road to ensure accuracy in terms of both power delivery and also to ensure fuelling, boost pressures and exhaust gas temperatures are all within tolerance. Our aim is for maximum power whilst maintaining optimum reliability.
STAGES

Performance STAGES

Power (bhp)

Original
225

bhp

Modified
252

bhp

Difference

Torque (lb/ft)

Original
206

lb/ft

Modified
250

lb/ft

Difference

STAGE NOTES

Our Stage 1 ECU remap is developed to safely improve your vehicle's power and torque whilst maintaining standard components and remaining within tolerances. <br/><br/> It's the perfect balance of increased power and day-to-day usability, which is ideal for those who want extra performance but not at the cost of additional hardware or reliability.d as our fast road application which is the best all round performance for stock vehicles.

OPTIONS

ADDITIONAL OPTIONS

Where applicable we are able to switch off the software functionality and monitoring for the Exhaust Gas Recirculation valve enabling it to be blanked off. For more information please refer to our section on EGR Removal.Where applicable we are able to raise the RPM limiter enabling a wider RPM band for performance. This is available on both petrol and diesel engines.Where applicable we are able to raise/lower or completely remove the maximum speed limiter from a vehicle.Where applicable we are able to switch off the software functionality and monitoring for the swirl flaps, enabling them to be removed from the vehicle and save costly repair bills.Where applicable we are able to switch off the software functionality and monitoring for the secondary oxygen (O₂) sensor, allowing for the removal of the catalytic converter without triggering diagnostic trouble codes or warning lights.
REVIEWS

CUSTOMER REVIEWS

MODEL:
Audi S3
VARIANT:
1.8 20VT
POSTED: 18 May / 2015 / 11:41
ROY, UNITED KINGDOM

Hello i have just had my Audi S3 remapped ....all I can say is its worth every penny it now flies, it was a quick car before the remap but now its completely different. If Audi put these cars for sale with this much power they would have sold hundreds/thousands more.

If your thinking of getting your car remapped use these guys YOU WONT BE DISAPPOINTED! Only problem is its costing more in petrol ONLY because i cant stop driving it all the time. Top job thanks.

Regards,

AUTOMATIC

HAVE AN AUTOMATIC?

Alongside the engine control unit (ECU) we are also able to provide transmission control unit (TCU) software to help further enhance your vehicle. There is a lot of limitation built into modern gearbox software to help hold back the power gains you are trying to achieve from your engine, our gearbox software overcomes this and helps transform the way the car drives. Some of the modifications include raising maximum torque limiters, faster gear shift speeds, increased clamping pressures to prevent clutch wear, increased engine RPM limiters and much more…

CUSTOM

ARE YOU AFTER CUSTOM TUNING?

For most makes and models we can develop custom software to suit your individual setup. Get in touch with us and let us know your build to see what we can do for you.

DEALER

FIND A DEALER

FIND A DEALER

Enter your location to find your nearest dealer